The MakersCONTROLLER works in combination with MakersDRIVER(s) to create sunrise, sunset and other special effects throughout the day. Once the color ratios have been independently dialed in on the MakersDRIVER knobs, the MakersCONTROLLER scales the MakersDRIVER ratios up and down to match a user defined schedule…. Continue reading →
We’ve had a few users asking if these multichip LEDs would work on the MakersLED Heatsink.
We decided to grab a 40mm and a 20mm wide multichip off eBay and put them to the test. The larger multi-chip LEDs require high forward voltages, so of course we decided to our new MakersDRIVER which has up to a 45V forward voltage.
As you can see in the pictures, our patent pending LED star mounting t-slots had no problem mounting these big guys down to the heatsink. We did put a dab of thermal grease down under the LED to make sure it was completely in contact with the heatsink.
We turned the LEDs waaaaay down with the MakersDRIVER to take these pics.
Key Words: 10W China LED, 15W China LED, 20W China LED, 50W China LED, 100W China LED Package.
The MakersDRIVER takes building finished DIY LED fixtures to a new level by simplifying power connections and providing multiple options for dimming control.
The MakersDRIVER utilizes an inexpensive 48V DC power source to drive up to 28 LEDs, a fan, and an optional controller. It provides 2 dimming channels, each capable of driving 14 LEDs. The MakersDRIVER incorporates user-replaceable Meanwell LDD series LED drivers. Dimming options include integrated knobs, 0-10V input, and a serial data interface.
Drives up to 28 3v LEDs at 1000mA (45V available per channel)
2 channels of dimming (14 LEDs/channel)
Manual Dimming Interface
Multiple External Control options available:
Accepts 0-10V DC Analog lighting control signal (compatible with DIM4)
Data Interface with MakersCONTROLLER lighting controller (coming soon)
Daisy chain multiple MakersDRIVERS for single point of control with timed dimming
Powers one 12v Fan (no extra fan power supply needed!)
Fan failure detection – Flashes LEDs to alert failure (if fan is detected upon start-up)
Sockets provided for Meanwell LDD drivers allow for removal (upgrade and replacement)
Includes 2 1000mA Meanwell LDD Drivers (Compatible with 700mA LDD drivers)
Utilizes inexpensive 48V DC power supplies (not Included)
Fused, Reverse polarity protection
Docks into 1ft or greater MakersLED heatsinks with space for a fan
90 Day Warranty*
Not Included:
Heatsink, 48V Power Supply, Wire/cables, Fan, LEDs.
Specifications are subject to change. Estimated shipping date is April 17.
*Warranty:90 day limited warranty against defects in materials and workmanship. MakersLED LLC will determine the root cause of the defect, and your item may be repaired or replaced free of charge. Customers pay for shipping to our service location and we pay for the return shipment. Warranty does not cover failure caused by accident, misuse, abuse, alteration, or faulty installation.
The integrated upper T-slots of the MakersLED heatsink makes it easy to add U-bolts, Eye-bolts, or straight bolts for mounting your fixture. _
We’re trying to make mounting even easier by offering a new cable hanging kit. It is quite affordable too, at only $12 — which is almost 1/3 the cost of some commercial hanging kits!